In machine learning, hyperparameter optimization or tuning is the problem of choosing a set of optimal hyperparameters for a learning algorithm. A hyperparameter is a parameter whose value is used to control the learning process, which must be configured before the process starts. Hyperparameter optimization determines the set of hyperparameters that yields an optimal model which minimizes a predefined loss function on a given data set. The objective function takes a set of hyperparameters and returns the associated loss. Cross-validation is often used to estimate this generalization performance, and therefore choose the set of values for hyperparameters that maximize it. == Approaches == === Grid search === The traditional method for hyperparameter optimization has been grid search, or a parameter sweep, which is simply an exhaustive searching through a manually specified subset of the hyperparameter space of a learning algorithm. A grid search algorithm must be guided by some performance metric, typically measured by cross-validation on the training set or evaluation on a hold-out validation set. Since the parameter space of a machine learner may include real-valued or unbounded value spaces for certain parameters, manually set bounds and discretization may be necessary before applying grid search. For example, a typical soft-margin SVM classifier equipped with an RBF kernel has at least two hyperparameters that need to be tuned for good performance on unseen data: a regularization constant C and a kernel hyperparameter γ. Both parameters are continuous, so to perform grid search, one selects a finite set of "reasonable" values for each, say C ∈ { 10 , 100 , 1000 } {\displaystyle C\in \{10,100,1000\}} γ ∈ { 0.1 , 0.2 , 0.5 , 1.0 } {\displaystyle \gamma \in \{0.1,0.2,0.5,1.0\}} Grid search then trains an SVM with each pair (C, γ) in the Cartesian product of these two sets and evaluates their performance on a held-out validation set (or by internal cross-validation on the training set, in which case multiple SVMs are trained per pair). Finally, the grid search algorithm outputs the settings that achieved the highest score in the validation procedure. Grid search suffers from the curse of dimensionality, but is often embarrassingly parallel because the hyperparameter settings it evaluates are typically independent of each other. === Random search === Random Search replaces the exhaustive enumeration of all combinations by selecting them randomly. This can be simply applied to the discrete setting described above, but also generalizes to continuous and mixed spaces. A benefit over grid search is that random search can explore many more values than grid search could for continuous hyperparameters. It can outperform Grid search, especially when only a small number of hyperparameters affects the final performance of the machine learning algorithm. In this case, the optimization problem is said to have a low intrinsic dimensionality. Random Search is also embarrassingly parallel, and additionally allows the inclusion of prior knowledge by specifying the distribution from which to sample. Despite its simplicity, random search remains one of the important base-lines against which to compare the performance of new hyperparameter optimization methods. === Bayesian optimization === Bayesian optimization is a global optimization method for noisy black-box functions. Applied to hyperparameter optimization, Bayesian optimization builds a probabilistic model of the function mapping from hyperparameter values to the objective evaluated on a validation set. By iteratively evaluating a promising hyperparameter configuration based on the current model, and then updating it, Bayesian optimization aims to gather observations revealing as much information as possible about this function and, in particular, the location of the optimum. It tries to balance exploration (hyperparameters for which the outcome is most uncertain) and exploitation (hyperparameters expected close to the optimum). In practice, Bayesian optimization has been shown to obtain better results in fewer evaluations compared to grid search and random search, due to the ability to reason about the quality of experiments before they are run. === Gradient-based optimization === For specific learning algorithms, it is possible to compute the gradient with respect to hyperparameters and then optimize the hyperparameters using gradient descent. The first usage of these techniques was focused on neural networks. Since then, these methods have been extended to other models such as support vector machines or logistic regression. A different approach in order to obtain a gradient with respect to hyperparameters consists in differentiating the steps of an iterative optimization algorithm using automatic differentiation. A more recent work along this direction uses the implicit function theorem to calculate hypergradients and proposes a stable approximation of the inverse Hessian. The method scales to millions of hyperparameters and requires constant memory. In a different approach, a hypernetwork is trained to approximate the best response function. One of the advantages of this method is that it can handle discrete hyperparameters as well. Self-tuning networks offer a memory efficient version of this approach by choosing a compact representation for the hypernetwork. More recently, Δ-STN has improved this method further by a slight reparameterization of the hypernetwork which speeds up training. Δ-STN also yields a better approximation of the best-response Jacobian by linearizing the network in the weights, hence removing unnecessary nonlinear effects of large changes in the weights. Apart from hypernetwork approaches, gradient-based methods can be used to optimize discrete hyperparameters also by adopting a continuous relaxation of the parameters. Such methods have been extensively used for the optimization of architecture hyperparameters in neural architecture search. === Evolutionary optimization === Evolutionary optimization is a methodology for the global optimization of noisy black-box functions. In hyperparameter optimization, evolutionary optimization uses evolutionary algorithms to search the space of hyperparameters for a given algorithm. Evolutionary hyperparameter optimization follows a process inspired by the biological concept of evolution: Create an initial population of random solutions (i.e., randomly generate tuples of hyperparameters, typically 100+) Evaluate the hyperparameter tuples and acquire their fitness function (e.g., 10-fold cross-validation accuracy of the machine learning algorithm with those hyperparameters) Rank the hyperparameter tuples by their relative fitness Replace the worst-performing hyperparameter tuples with new ones generated via crossover and mutation Repeat steps 2-4 until satisfactory algorithm performance is reached or is no longer improving. Evolutionary optimization has been used in hyperparameter optimization for statistical machine learning algorithms, automated machine learning, typical neural network and deep neural network architecture search, as well as training of the weights in deep neural networks. === Population-based === Population Based Training (PBT) learns both hyperparameter values and network weights. Multiple learning processes operate independently, using different hyperparameters. As with evolutionary methods, poorly performing models are iteratively replaced with models that adopt modified hyperparameter values and weights based on the better performers. This replacement model warm starting is the primary differentiator between PBT and other evolutionary methods. PBT thus allows the hyperparameters to evolve and eliminates the need for manual hypertuning. The process makes no assumptions regarding model architecture, loss functions or training procedures. PBT and its variants are adaptive methods: they update hyperparameters during the training of the models. On the contrary, non-adaptive methods have the sub-optimal strategy to assign a constant set of hyperparameters for the whole training. === Early stopping-based === A class of early stopping-based hyperparameter optimization algorithms is purpose-built for large search spaces of continuous and discrete hyperparameters, particularly when the computational cost to evaluate the performance of a set of hyperparameters is high. Irace implements the iterated racing algorithm, that focuses the search around the most promising configurations, using statistical tests to discard the ones that perform poorly. Another early stopping hyperparameter optimization algorithm is successive halving (SHA), which begins as a random search but periodically prunes low-performing models, thereby focusing computational resources on more promising models. Asynchronous successive halving (ASHA) further improves upon SHA's resource utilization profile by removing the need to synchronously evaluate a
IT baseline protection
The IT baseline protection (German: IT-Grundschutz) approach from the German Federal Office for Information Security (BSI) is a methodology to identify and implement computer security measures in an organization. The aim is the achievement of an adequate and appropriate level of security for IT systems. To reach this goal the BSI recommends "well-proven technical, organizational, personnel, and infrastructural safeguards". Organizations and federal agencies show their systematic approach to secure their IT systems (e.g. Information Security Management System) by obtaining an ISO/IEC 27001 Certificate on the basis of IT-Grundschutz. == Overview baseline security == The term baseline security signifies standard security measures for typical IT systems. It is used in various contexts with somewhat different meanings. For example: Microsoft Baseline Security Analyzer: Software tool focused on Microsoft operating system and services security Cisco security baseline: Vendor recommendation focused on network and network device security controls Nortel baseline security: Set of requirements and best practices with a focus on network operators ISO/IEC 13335-3 defines a baseline approach to risk management. This standard has been replaced by ISO/IEC 27005, but the baseline approach was not taken over yet into the 2700x series. There are numerous internal baseline security policies for organizations, The German BSI has a comprehensive baseline security standard, that is compliant with the ISO/IEC 27000-series == BSI IT baseline protection == The foundation of an IT baseline protection concept is initially not a detailed risk analysis. It proceeds from overall hazards. Consequently, sophisticated classification according to damage extent and probability of occurrence is ignored. Three protection needs categories are established. With their help, the protection needs of the object under investigation can be determined. Based on these, appropriate personnel, technical, organizational and infrastructural security measures are selected from the IT Baseline Protection Catalogs. The Federal Office for Security in Information Technology's IT Baseline Protection Catalogs offer a "cookbook recipe" for a normal level of protection. Besides probability of occurrence and potential damage extents, implementation costs are also considered. By using the Baseline Protection Catalogs, costly security analyses requiring expert knowledge are dispensed with, since overall hazards are worked with in the beginning. It is possible for the relative layman to identify measures to be taken and to implement them in cooperation with professionals. The BSI grants a baseline protection certificate as confirmation for the successful implementation of baseline protection. In stages 1 and 2, this is based on self declaration. In stage 3, an independent, BSI-licensed auditor completes an audit. Certification process internationalization has been possible since 2006. ISO/IEC 27001 certification can occur simultaneously with IT baseline protection certification. (The ISO/IEC 27001 standard is the successor of BS 7799-2). This process is based on the new BSI security standards. This process carries a development price which has prevailed for some time. Corporations having themselves certified under the BS 7799-2 standard are obliged to carry out a risk assessment. To make it more comfortable, most deviate from the protection needs analysis pursuant to the IT Baseline Protection Catalogs. The advantage is not only conformity with the strict BSI, but also attainment of BS 7799-2 certification. Beyond this, the BSI offers a few help aids like the policy template and the GSTOOL. One data protection component is available, which was produced in cooperation with the German Federal Commissioner for Data Protection and Freedom of Information and the state data protection authorities and integrated into the IT Baseline Protection Catalog. This component is not considered, however, in the certification process. == Baseline protection process == The following steps are taken pursuant to the baseline protection process during structure analysis and protection needs analysis: The IT network is defined. IT structure analysis is carried out. Protection needs determination is carried out. A baseline security check is carried out. IT baseline protection measures are implemented. Creation occurs in the following steps: IT structure analysis (survey) Assessment of protection needs Selection of actions Running comparison of nominal and actual. === IT structure analysis === An IT network includes the totality of infrastructural, organizational, personnel, and technical components serving the fulfillment of a task in a particular information processing application area. An IT network can thereby encompass the entire IT character of an institution or individual division, which is partitioned by organizational structures as, for example, a departmental network, or as shared IT applications, for example, a personnel information system. It is necessary to analyze and document the information technological structure in question to generate an IT security concept and especially to apply the IT Baseline Protection Catalogs. Due to today's usually heavily networked IT systems, a network topology plan offers a starting point for the analysis. The following aspects must be taken into consideration: The available infrastructure, The organizational and personnel framework for the IT network, Networked and non-networked IT systems employed in the IT network. The communications connections between IT systems and externally, IT applications run within the IT network. === Protection needs determination === The purpose of the protection needs determination is to investigate what protection is sufficient and appropriate for the information and information technology in use. In this connection, the damage to each application and the processed information, which could result from a breach of confidentiality, integrity or availability, is considered. Important in this context is a realistic assessment of the possible follow-on damages. A division into the three protection needs categories "low to medium", "high" and "very high" has proved itself of value. "Public", "internal" and "secret" are often used for confidentiality. === Modelling === Heavily networked IT systems typically characterize information technology in government and business these days. As a rule, therefore, it is advantageous to consider the entire IT system and not just individual systems within the scope of an IT security analysis and concept. To be able to manage this task, it makes sense to logically partition the entire IT system into parts and to separately consider each part or even an IT network. Detailed documentation about its structure is prerequisite for the use of the IT Baseline Protection Catalogs on an IT network. This can be achieved, for example, via the IT structure analysis described above. The IT Baseline Protection Catalogs' components must ultimately be mapped onto the components of the IT network in question in a modelling step. === Baseline security check === The baseline security check is an organisational instrument offering a quick overview of the prevailing IT security level. With the help of interviews, the status quo of an existing IT network (as modelled by IT baseline protection) relative to the number of security measures implemented from the IT Baseline Protection Catalogs are investigated. The result is a catalog in which the implementation status "dispensable", "yes", "partly", or "no" is entered for each relevant measure. By identifying not yet, or only partially, implemented measures, improvement options for the security of the information technology in question are highlighted. The baseline security check gives information about measures, which are still missing (nominal vs. actual comparison). From this follows what remains to be done to achieve baseline protection through security. Not all measures suggested by this baseline check need to be implemented. Peculiarities are to be taken into account! It could be that several more or less unimportant applications are running on a server, which have lesser protection needs. In their totality, however, these applications are to be provided with a higher level of protection. This is called the (cumulation effect). The applications running on a server determine its need for protection. Several IT applications can run on an IT system. When this occurs, the application with the greatest need for protection determines the IT systems protection category. Conversely, it is conceivable that an IT application with great protection needs does not automatically transfer this to the IT system. This may happen because the IT system is configured redundantly, or because only an inconsequential part is running on it. This is called the (distribution effect). This is the case, fo
Clipping (computer graphics)
Clipping, in the context of computer graphics, is a method to selectively enable or disable rendering operations within a defined region of interest. Mathematically, clipping can be described using the terminology of constructive geometry. A rendering algorithm only draws pixels in the intersection between the clip region and the scene model. Lines and surfaces outside the view volume (aka. frustum) are removed. Clip regions are commonly specified to improve render performance. Pixels that will be drawn are said to be within the clip region. Pixels that will not be drawn are outside the clip region. More informally, pixels that will not be drawn are said to be "clipped." == In 2D graphics == In two-dimensional graphics, a clip region may be defined so that pixels are only drawn within the boundaries of a window or frame. Clip regions can also be used to selectively control pixel rendering for aesthetic or artistic purposes. In many implementations, the final clip region is the composite (or intersection) of one or more application-defined shapes, as well as any system hardware constraints In one example application, consider an image editing program. A user application may render the image into a viewport. As the user zooms and scrolls to view a smaller portion of the image, the application can set a clip boundary so that pixels outside the viewport are not rendered. In addition, GUI widgets, overlays, and other windows or frames may obscure some pixels from the original image. In this sense, the clip region is the composite of the application-defined "user clip" and the "device clip" enforced by the system's software and hardware implementation. Application software can take advantage of this clip information to save computation time, energy, and memory, avoiding work related to pixels that aren't visible. == In 3D graphics == In three-dimensional graphics, the terminology of clipping can be used to describe many related features. Typically, "clipping" refers to operations in the plane that work with rectangular shapes, and "culling" refers to more general methods to selectively process scene model elements. This terminology is not rigid, and exact usage varies among many sources. Scene model elements include geometric primitives: points or vertices; line segments or edges; polygons or faces; and more abstract model objects such as curves, splines, surfaces, and even text. In complicated scene models, individual elements may be selectively disabled (clipped) for reasons including visibility within the viewport (frustum culling); orientation (backface culling), obscuration by other scene or model elements (occlusion culling, depth- or "z" clipping). Sophisticated algorithms exist to efficiently detect and perform such clipping. Many optimized clipping methods rely on specific hardware acceleration logic provided by a graphics processing unit (GPU). The concept of clipping can be extended to higher dimensionality using methods of abstract algebraic geometry. === Near clipping === Beyond projection of vertices & 2D clipping, near clipping is required to correctly rasterise 3D primitives; this is because vertices may have been projected behind the eye. Near clipping ensures that all the vertices used have valid 2D coordinates. Together with far-clipping it also helps prevent overflow of depth-buffer values. Some early texture mapping hardware (using forward texture mapping) in video games suffered from complications associated with near clipping and UV coordinates. === Occlusion clipping (Z- or depth clipping) === In 3D computer graphics, "Z" often refers to the depth axis in the system of coordinates centered at the viewport origin: "Z" is used interchangeably with "depth", and conceptually corresponds to the distance "into the virtual screen." In this coordinate system, "X" and "Y" therefore refer to a conventional cartesian coordinate system laid out on the user's screen or viewport. This viewport is defined by the geometry of the viewing frustum, and parameterizes the field of view. Z-clipping, or depth clipping, refers to techniques that selectively render certain scene objects based on their depth relative to the screen. Most graphics toolkits allow the programmer to specify a "near" and "far" clip depth, and only portions of objects between those two planes are displayed. A creative application programmer can use this method to render visualizations of the interior of a 3D object in the scene. For example, a medical imaging application could use this technique to render the organs inside a human body. A video game programmer can use clipping information to accelerate game logic. For example, a tall wall or building that occludes other game entities can save GPU time that would otherwise be spent transforming and texturing items in the rear areas of the scene; and a tightly integrated software program can use this same information to save CPU time by optimizing out game logic for objects that aren't seen by the player. == Algorithms == Line clipping algorithms: Cohen–Sutherland Liang–Barsky Fast-clipping Cyrus–Beck Nicholl–Lee–Nicholl Skala O(lg N) algorithm Polygon clipping algorithms: Greiner–Hormann Sutherland–Hodgman Weiler–Atherton Vatti Rendering methodologies Painter's algorithm
IDMS
The Integrated Database Management System (IDMS) is a network model (CODASYL) database management system for mainframes. It was first developed at BFGoodrich and later marketed by Cullinane Database Systems (renamed Cullinet in 1983). Since 1989 the product has been owned by Computer Associates (now CA Technologies), who renamed it Advantage CA-IDMS and later simply to CA IDMS. In 2018 Broadcom acquired CA Technologies, renaming it back to IDMS. == History == The roots of IDMS go back to the pioneering database management system called Integrated Data Store (IDS), developed at General Electric by a team led by Charles Bachman and first released in 1964. In the early 1960s IDS was taken from its original form, by the computer group of the BFGoodrich Chemical Division, and re-written in a language called Intermediate System Language (ISL). ISL was designed as a portable system programming language able to produce code for a variety of target machines. Since ISL was actually written in ISL, it was able to be ported to other machine architectures with relative ease, and then to produce code that would execute on them. The Chemical Division computer group had given some thought to selling copies of IDMS to other companies, but was told by management that they were not in the software products business. Eventually, a deal was struck with John Cullinane to buy the rights and market the product. Because Cullinane was required to remit royalties back to B.F. Goodrich, all add-on products were listed and billed as separate products – even if they were mandatory for the core IDMS product to work. This sometimes confused customers. The original platforms were the GE 235 computer and GE DATANET-30 message switching computer: later the product was ported to IBM mainframes and to DEC and ICL hardware. The IBM-ported version runs on IBM mainframe systems (System/360, System/370, System/390, zSeries, System z9). In the mid-1980s, it was claimed that some 2,500 IDMS licenses had been sold. Users included the Strategic Air Command, Ford of Canada, Ford of Europe, Jaguar Cars, Clarks Shoes UK, Axa/PPP, MAPFRE, Royal Insurance, Tesco, Manulife, Hudson's Bay Company, Cleveland Clinic, Bank of Canada, General Electric, Aetna and BT in the UK. A version for use on the Digital Equipment Corporation PDP-11 series of computers was sold to DEC and was marketed as DBMS-11. In 1976 the source code was licensed to ICL, who ported the software to run on their 2900 series mainframes, and subsequently also on the older 1900 range. ICL continued development of the software independently of Cullinane, selling the original ported product under the name ICL 2900 IDMS and an enhanced version as IDMSX. In this form it was used by many large UK users, an example being the Pay-As-You-Earn system operated by Inland Revenue. Many of these IDMSX systems for UK Government were still running in 2013. In the early to mid-1980s, relational database management systems started to become more popular, encouraged by increasing hardware power and the move to minicomputers and client–server architecture. Relational databases offered improved development productivity over CODASYL systems, and the traditional objections based on poor performance were slowly diminishing. Cullinet attempted to continue competing against IBM's DB2 and other relational databases by developing a relational front-end and a range of productivity tools. These included Automatic System Facility (ASF), which made use of a pre-existing IDMS feature called LRF (Logical Record Facility). ASF was a fill-in-the-blanks database generator that would also develop a mini-application to maintain the tables. It is difficult to judge whether such features may have been successful in extending the selling life of the product, but they made little impact in the long term. Those users who stayed with IDMS were primarily interested in its high performance, not in its relational capabilities. It was widely recognized (helped by a high-profile campaign by E. F. Codd, the father of the relational model) that there was a significant difference between a relational database and a network database with a relational veneer. In 1989 Computer Associates continued after Cullinet acquisition with the development and released Release 12.0 with full SQL in 1992–93. CA Technologies continued to market and support the CA IDMS and enhanced IDMS in subsequent releases by TCP/IP support, two phase commit support, XML publishing, zIIP specialty processor support, Web-enabled access in combination with CA IDMS Server, SQL Option and GUI database administration via CA IDMS Visual DBA tool. CA-IDMS systems are today still running businesses worldwide. Many customers have opted to web-enable their applications via the CA-IDMS SQL Option which is part of CA Technologies' Dual Database Strategy. == Integrated Data Dictionary == One of the sophisticated features of IDMS was its built-in Integrated data dictionary (IDD). The IDD was primarily developed to maintain database definitions. It was itself an IDMS database. DBAs (database administrators) and other users interfaced with the IDD using a language called Data Dictionary Definition Language (DDDL). IDD was also used to store definitions and code for other products in the IDMS family such as ADS/Online and IDMS-DC. IDD's power was that it was extensible and could be used to create definitions of just about anything. Some companies used it to develop in-house documentation. == Overview == === Logical Data Model === The data model offered to users is the CODASYL network model. The main structuring concepts in this model are records and sets. Records essentially follow the COBOL pattern, consisting of fields of different types: this allows complex internal structure such as repeating items and repeating groups. The most distinctive structuring concept in the Codasyl model is the set. Not to be confused with a mathematical set, a Codasyl set represents a one-to-many relationship between records: one owner, many members. The fact that a record can be a member in many different sets is the key factor that distinguishes the network model from the earlier hierarchical model. As with records, each set belongs to a named set type (different set types model different logical relationships). Sets are in fact ordered, and the sequence of records in a set can be used to convey information. A record can participate as an owner and member of any number of sets. Records have identity, the identity being represented by a value known as a database key. In IDMS, as in most other Codasyl implementations, the database key is directly related to the physical address of the record on disk. Database keys are also used as pointers to implement sets in the form of linked lists and trees. This close correspondence between the logical model and the physical implementation (which is not a strictly necessary part of the Codasyl model, but was a characteristic of all successful implementations) is responsible for the efficiency of database retrieval, but also makes operations such as database loading and restructuring rather expensive. Records can be accessed directly by database key, by following set relationships, or by direct access using key values. Initially the only direct access was through hashing, a mechanism known in the Codasyl model as CALC access. In IDMS, CALC access is implemented through an internal set, linking all records that share the same hash value to an owner record that occupies the first few bytes of every disk page. In subsequent years, some versions of IDMS added the ability to access records using BTree-like indexes. === Storage === IDMS organizes its databases as a series of files. These files are mapped and pre-formatted into so-called areas. The areas are subdivided into pages which correspond to physical blocks on the disk. The database records are stored within these blocks. The DBA allocates a fixed number of pages in a file for each area. The DBA then defines which records are to be stored in each area, and details of how they are to be stored. IDMS intersperses special space-allocation pages throughout the database. These pages are used to keep track of the free space available in each page in the database. To reduce I/O requirements, the free space is only tracked for all pages when the free space for the area falls below 30%. Four methods are available for storing records in an IDMS database: Direct, Sequential, CALC, and VIA. The Fujitsu/ICL IDMSX version extends this with two more methods, Page Direct, and Random. In direct mode the target database key is specified by the user and is stored as close as possible to that DB key, with the actual DB key on which the record is stored being returned to the application program. Sequential placement (not to be confused with indexed sequential), simply places each new record at the end of the area. This option is rarely used. CALC uses a hashing algo
GEPIR
GEPIR (Global Electronic Party Information Registry) was a distributed database operated and owned by GS1 that contains basic information on over 1,000,000 companies in over 100 countries. The database could be searched by Global Trade Item Number (GTIN) code (including Universal Product Code (UPC) and EAN-13 codes), container Code (Serial Shipping Container Code (SSCC)), location number (Global Location Number (GLN)), and (in some countries) the company name. A SOAP webservice existed for API access. As of end December 2023, GEPIR was replaced by a service called Verified by GS1. While it operated, GEPIR had more than 1 million members in more than 100 countries. In 2013, all GS1 111 member organisations joined GEPIR. == Access == GEPIR was accessible for free in almost all countries but the number of request per day was limited (from 20 to 30). Since October 2013, GS1 France restricts access to GEPIR to companies (registration with SIREN code was required to use it). A premium access service had been created by GS1 France in January 2010 which allows companies to use GS1 web and SOAP interface without any limit. == System architecture == GEPIR was a lookup service coordinated by the GS1 GO that provided all end users with the ability to look up information about GS1 Identification Keys. Depending on the service, systems were provided by GS1 Member Organisations (MOs) or 3rd party service providers, or both. Where a GS1 MO did not choose to provide the service directly to its end users, the GS1 Global Office provided the service for that geography. Some services involved a technical component deployed by the GS1 Global Office that coordinates the systems provided by GS1 MOs and/or 3rd party service providers. The GEPIR service was provided by systems deployed by GS1 MOs, with the GS1 GO providing a central point of coordination to federate the local systems. The GS1 GO also provides the MO-level service for MOs that could not or did not wish to deploy their own system.
Vatican News App
The Vatican News App is an official mobile application software issued by the Vatican's Dicastery for Communication. Formerly titled The Pope App, the app was launched on January 23, 2013, under the auspices of the Pontifical Council for Social Communications, a now-defunct dicastery that was merged into the Secretariat (now Dicastery) for Communication in March 2016. Initially, The Pope App was available only on iOS devices, but became available for Android phones at the end of February 2013. The app is available for download on iOS and Android in five languages: English, French, Italian, Portuguese and Spanish. It was originally promoted as an application with focus on the figure of the Pope which made it possible to follow the Pope's events while they are taking place. Alerts notified the followers by informing and offering access to "official papal-related content in a variety of formats". The app also enabled its users to see areas of the Vatican through webcams allocated throughout St. Peter's Square in Rome that broadcast images. In early 2018, The Pope App was relaunched as the Vatican News App, accompanied by a redesign that eliminated many of the previous version's features, reducing the app to a more conventional news service, with increased emphasis on news from the Vatican and the worldwide Catholic Church and less focus on the day-to-day activities of the Pope.
Computer Graphics: Principles and Practice
Computer Graphics: Principles and Practice is a textbook written by James D. Foley, Andries van Dam, Steven K. Feiner, John Hughes, Morgan McGuire, David F. Sklar, and Kurt Akeley and published by Addison–Wesley. First published in 1982 as Fundamentals of Interactive Computer Graphics, it is widely considered a classic standard reference book on the topic of computer graphics. It is sometimes known as the bible of computer graphics (due to its size). == Editions == === First Edition === The first edition, published in 1982 and titled Fundamentals of Interactive Computer Graphics, discussed the SGP library, which was based on ACM's SIGGRAPH CORE 1979 graphics standard, and focused on 2D vector graphics. === Second Edition === The second edition, published 1990, was completely rewritten and covered 2D and 3D raster and vector graphics, user interfaces, geometric modeling, anti-aliasing, advanced rendering algorithms and an introduction to animation. The SGP library was replaced by SRGP (Simple Raster Graphics Package), a library for 2D raster primitives and interaction handling, and SPHIGS (Simple PHIGS), a library for 3D primitives, which were specifically written for the book. === Second Edition in C === In the second edition in C, published in 1995, all examples were converted from Pascal to C. New implementations for the SRGP and SPHIGS graphics packages in C were also provided. === Third Edition === A third edition covering modern GPU architecture was released in July 2013. Examples in the third edition are written in C++, C#, WPF, GLSL, OpenGL, G3D, or pseudocode. == Awards == The book has won a Front Line Award (Hall of Fame) in 1998.